Return to product catalog

Metal-polymer gutters - designed to collect and direct rainwater flows from the roof, to which they are attached with special brackets. Metal-polymer gutters are made of high quality galvanized steel with a thickness of 0.5 mm, followed by the application of a protective polymer coating. The coating thickness on each side is from 80 to 250 μm, (depending on the type of coating), which ensures the longest possible life. The metal base prevents the gutter from linear expansion with temperature changes, and a polymer coating of this thickness reliably protects from the effects of precipitation. The gutter has a width of 120mm, but it has a depth of 67mm. The increased depth of the gutter allows for the passage of a stream of water in a larger volume than analogues with a width of 125 mm and a depth of 53 mm.

The flow of water passing through the gutter of our production approaches the flow through the gutters with a width of 130 mm. Thus, we have the optimal size for the quality of water drainage from the roof. It is possible to buy a gutter at our points of sale. The manufacture of gutters is of three types.

1. The gutters are smooth classic;

2. Gutters having stiffeners at the edges, allowing the connection "rib to rib" as the gutters with connectors, and gutters with a drain funnel or angle of the gutter. Such a connection simplifies the assembly of the system and gives greater reliability to the mount.

3. Reinforced gutters with stiffeners along the entire length of the gutter with a pitch of 250 mm. Such troughs withstand more bending stress. Such gutters are connected with a 260mm connector. The production of gutters of this type is more labor-intensive than usual, therefore, the price of gutters reinforced is higher than usual. These gutters are made to order by agreement with the customer.